243wssm sizing dies

Discussions on the Olympic Arms WSSM Series

Moderator: Charlie-2-6

243wssm sizing dies

Postby woodlandshooter » Mon Feb 16, 2015 11:41 am

who has the most consistent sizing dies?

I have RCBS dies at the moment.

Also, anyone have issues with the case rum being bent slightly from re-sizing? I may not have enough lube, but this is causing headspace problems and the rounds with a tweaked rim will not chamber
woodlandshooter
Rifleman
Rifleman
 
Posts: 33
Joined: Tue Nov 25, 2014 12:45 pm
Location: Wetstern WA

Re: 243wssm sizing dies

Postby Globemaster » Mon Feb 16, 2015 12:18 pm

woodlandshooter wrote: who has the most consistent sizing dies? I have RCBS dies at the moment.

I haven't used a .234WSSM sizing-die per-say, but I have used OA2-Member 7FootJumper's Dillon® 550 press for my 25WSSM

woodlandshooter wrote: Also, anyone have issues with the case rum being bent slightly from re-sizing? I may not have enough lube, but this is causing headspace problems and the rounds with a tweaked rim will not chamber

and haven't had any of these types of issues arise from my limited use of the press; and I've reloaded a few hundred rounds, a couple of times on this set-up; and I'm using a spray type lubricant.


Image

Image

Image

Image

Image

Image
The Nonsense Stops! … When The Hammer Drops!
Image
User avatar
Globemaster
OA2 Staff - AC/TEAM MEMBER
OA2 Staff - AC/TEAM MEMBER
 
Posts: 20828
Joined: Wed Dec 28, 2005 4:42 pm
Location: Socialist Republic of Washington State

Re: 243wssm sizing dies

Postby Rattler » Wed Feb 18, 2015 6:55 am

Oly recommends Hornady Small base.
"A toast? Yeah. To high treason... So - Here's to the men who did what was considered wrong, in order to do what they knew was right. What they knew was right."
Nicholas Cage as Ben Gates: National Treasure
User avatar
Rattler
OA2 PRESIDENT
OA2 PRESIDENT
 
Posts: 11819
Joined: Thu Oct 21, 2010 2:19 pm
Location: T9O, WA


Return to WSSM Central

Who is online

Users browsing this forum: No registered users and 1 guest